Description
Pre-owned Kingsley Harlot V3. In very good condition, 2 strips of velcro on the bottom. No box included.
The Harlot V3 is a hand-wired tube overdrive pedal using a single 12ax7 tube running at high voltage and a JFET transistor that is used to push the 12ax7 into overdrive. It covers mild, smooth tones through mid gain crunch to fairly aggressive rock tones. A second footswitch takes the Harlot into a higher gain mode which is great for increasing saturation and aggression for solo tones. The Harlot sounds natural, fat, dynamic and is very touch sensitive.
The 9VDC power supply (provided) is converted to 6VDC for the tube heaters and 240VDC for the tube plates for authentic tube performance.
The Gain and Volume controls set the amout of breakup (overdrive) and the output volume. While the Tone control rolls off high end, it is complemented by the "Lows" and "Highs" switch. Each of these mini toggle switches has three positions that incrementally increase the low end and high end respectively, providing a wide range of tonal responses.
The "More" footswitch adds an additonal amount of gain to push the overdrive into more saturation, the exact amount being set by the "More" control above the footswitch.
Measurements: 3 7/8” wide x 4 ¾” deep x 2.56" tall
Power requirements: 9VDC @ 500mA, center negative, 2.1mm jack