Tech 21 SansAmp Bass Driver DI (V2)


Price:
Sale price$249.00

Description

Tech 21 SansAmp - Bass Driver DI (V2)

SansAmps capture the warm, rich, natural tones of the most sought-after tube amplifiers. Within the parameters of each model’s particular design, the controls provide you with access to specific tone shaping characteristics within the tube amplifier sound spectrum.

The 100% analog SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar or bass speaker cabinet system. You can also place an external IR after a SansAmp to give additional flavor if you so desire. The SansAmp speaker sim is designed and individually tailored for a smooth, even response as would be achieved by a multiply-miked cabinet –without peaks, valleys, and notches associated with single miking and many IRs.
 

SansAmp products are designed to work seamlessly in both recording and stage environments. They can be used with almost any instrument, for any music style, and for multiple applications. Record directly to tape and disc or enhance previously recorded tracks. For live performances, they can drive a power amp and speakers, augment your existing amplifier set-up, or run directly into the mixer of a PA system.

Much more than just a direct box, the SansAmp Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between. Three different outputs to drive power amps, recording desks, PA mixers, or simply enhance your current rig. Controls include Presence for definition and upper harmonic content; Blend to combine the proportion of direct signal and SansAmp circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.

VERSION 2
With the popularity of 5- and 6-string basses going beyond fad status and becoming mainstream, we added a switch to adjust the bass frequency to extend into those lower registers. We also added a mid-range control and a switch to adjust its frequency. The core of the SansAmp Bass Driver and all of its tones remain true to its original design.

• Measures 4.75″ x 3.75″ x 2″
• Operable via phantom power.

• Operable with 9V alkaline battery (not included)

You may also like

Recently viewed